GETECH SEMI AUTOMATIC ROUTER MACHINE
GSR1280
The GSR1280 is a standalone router machine specially designed to route (de-panelize)large panels with PCB size of 500mm x 500mm into individual units. It is capable of speeds of up to 100mm/s and positioning speeds of 1000mm/s. It has two worktables that allows continuous routing with no stoppages during panel loading and unloading. The superior servo axis system provides high acceleration/deceleration, reducing cycle time (increase in production output) and at the same time maintaining high accuracy cutting.
Using a high-resolution CCD camera, and GSR user-friendly Windows-based software allows the user to program the routing paths in minutes. There are also no limitations in the number of programs stored. GSR1280 uses high-quality components and a welded steel structure to ensure rigidity and high performance. All the axes and linear guides used are protected from dust and dirt to increase lifespan and performance
|
S P E C I F I C A T I O N S
|
||
|
Capability |
Non-Routing Routing Speed Repeatability |
: 1000 mm/sec : 100 mm/sec max (depending on material, cutting quality & tool diameter) : ±0.1 mm straight lines, curves and interpolated profiles |
|
Manipulator |
Configuration Manipulator Motors Repeatability Resolution
|
: X, Y, W & Z axis : AC brushless servo motors : ±0.02 mm : ±0.01 mm
|
|
Workstation |
Design Panel Positioning Panel Size Panel Clamping Panel Thickness Component Height
|
: Dual workstation with dedicated pin fixtures, Manual panel loading/unloading : Located by tooling holes or edges of PCB : 500 mm x 500 mm (19.6” x 19.6”) : Hinged Top clamp with gas spring assist (Option: Auto Top Clamp) : 0.4 mm – 8.0 mm : Top max. 12 mm, Bottom max. 25 mm (Standard) / 50 mm (Option)
|
|
Spindle System |
Spindle Motor Options Tool Change Cooling Router bit
|
: 0.5 kW (60,000 rpm) spindle with ESD / Ceramic bearings : 0.42 kW (100,000 rpm) : Manual tool change (Option: Auto-Tool Change) : Ambient cooled : Shank size 3.175 mm (1/8")
|
|
Dust Filtration System |
Power Filtration Vacuum Location Extraction Hose (x2) Noise Level
|
: 2 x 3.0 kW rotary vane vacuum blower : 3 stage filtrations with disposable filter bag (10 microns) : Top vacuum on spindle : ID 51 mm (2”), L= 4M : <78 dB
|
|
Vision System |
Video camera |
: High resolution CCD video camera |
|
Programming |
System Platform Product Setup
Variable Functions
Options
|
: Windows ® based Industrial PC : Vision assisted point to point manual teaching, vision assisted editing function / test run mode : Tool bit diameter compensation, Filter change interval (distance) setting Tool bit wear compensation. Other options available : Bar code support (1D or 2D), Fiducial alignment
|
|
Operation Monitor |
Router Bit Vacuum Machine
|
: Tool life tracking, PCB board count, tool broken sensor : Vacuum filter change alarm : Machine error history
|
|
Maintenance |
Router Bit Filter Bag Cleaning hose
|
: 100 to 300 M cutting distance before next tool change (depending on PCB) : 1000 to 1500 M before next filter bag change : Extra hose for internal periodic cleaning included
|
|
Safety Features |
"E" Stops, Spindle stop, Spindle motor overheat & Servo overload detection, Enclosed work area |
|
|
Dimensions & Utilities |
Machine Size (W x D x H) Vacuum Tank Size (Ø x H) Weight (Main + 2 Tanks) Power Supply
|
: 1,700 mm x 1,570 mm x 1,700 mm : 2 x 400 mm x 800 mm : Approx. 850kg + 50Kg : 3-phase, 380~415V, 50 Hz, 13.0 kW | 3-phase, 208~240V, 60 Hz, 22.6 kW
|
